美國Bath Iron Works造船廠:美國海軍首艘Zumwalt級USS Zumwalt(DDG-1000)號飛彈驅逐艦-儀裝情形

時間: 2014年6月13日.

地點: 緬因州Bath Iron Works造船廠.

Bath Iron Works造船廠美國海軍首艘Zumwalt級USS Zumwalt(DDG-1000)號飛彈驅逐艦儀裝作業與第2艘USS Michael Monsoor(DDG-1001)號飛彈驅逐艦建造情形.

 

美國海軍首艘Zumwalt級USS Zumwalt(DDG-1000)號飛彈驅逐艦儀裝作業情形.

실제 크기로 보시려면 클릭해 주세요

실제 크기로 보시려면 클릭해 주세요

실제 크기로 보시려면 클릭해 주세요

Closeup view of the Zumwalt's superstructure. The deckhouse above the bridge windows is a composite-material structure, built at Gulfport, Mississippi by Ingalls Shipbuilding and barged north to be installed in Maine. A similar structure is being built for the Michael Monsoor, but the Lyndon B. Johnson will have a steel structure built at Bath.

Radars and other sensors are embedded in the superstructure. The rectangular holes are intakes for the ship's gas turbines. The main exhaust is in the top of the structure.

Aft, the Zumwalt features a hangar and large flight deck.

The doors in the transom open into a large boat handling bay, featuring a boat ramp and storage able to accommodate two 11-meter rigid hull inflatable boats.

Construction sheds still clutter the flight deck.

艦上儀裝情形.

Seen from above the ship's flight deck, this view looks forward. The white construction  shed at left covers the hangar doors, while the large window at right is the ship's flight control center. Two Mark 46 30mm guns will be installed on top of the after deckhouse.

The tumblehome hull is quite apparent in this view from aft.

The forward and after decks are lined with vertical launchers able to handle a variety of missiles. The deck-edge scaffolding here is just outside the launchers, which are embedded in the side of the ship.

白色帆布包覆的Peripheral Vertical Launch system (PVLS)垂直發射系統.

The bridge windows are more visible here. Note the many recesses in the superstructure for radars and sensors.

位於艦首B砲位Advanced Gun System(AGS)155公厘先進艦砲系統.

Closeup of the No. 2 155 mm gun, known as an Advanced Gun System. These will be the largest guns fitted on any post-World War II warship design.

USS Zumwalt(DDG-1000)號飛彈驅逐艦儀裝作業與第2艘USS Michael Monsoor(DDG-1001)號飛彈驅逐艦建造情形.

실제 크기로 보시려면 클릭해 주세요

Zumwalt級第2艘USS Michael Monsoor(DDG-1001)號飛彈驅逐艦建造情形.

The stern features a long, shallow run aft for the ship's propeller shafts and twin rudders. Note the grey-painted twin doors for the boat bay in the transom at the ship's stern.

A large skeg is built into the after section's underbody, aiding directional stability and providing structural strength for the hull when it's out of the water.

The stern section still awaits installation of the rudders, propellers and propeller shafts.

相關連結:

http://en.wikipedia.org/wiki/Zumwalt-class_destroyer

http://en.wikipedia.org/wiki/USS_Zumwalt_(DDG-1000)

http://en.wikipedia.org/wiki/USS_Michael_Monsoor_(DDG-1001)

    全站熱搜

    天平阿棟 發表在 痞客邦 留言(0) 人氣()